Warning Lines
Warning Lines
Ballasted warning line (control zone or bump line) provide a 2 meter buffer from edge of roof inwards allowing safe work by maintenance crews. Our warning line systems meet or exceed all governmental regulations including but not limited to ANSI, OSHA, WorkSafeBC,
OHS Alberta, OHS Saskatchewan, Workplace Health & Safety Manitoba
Warning lines prevent falls by alerting workers to fall hazards. Warning lines should be set up around the work area at least 2 meters (6 feet 6 inches) from unprotected edges.
When a work area is enclosed by properly installed and maintained warning line, work inside the safe area can be done without additional fall protection measures. Anyone outside of the safe area and is working less than 2 metres from the edge must use approved fall protection.
Warning Line Specifications
• Meets or Exceeds governmental regulations
• Galvanized bases to resist corrosion
• Galvanized base foot print is 7.56 ft2
• Base sits on a masticated mat to protect roofing systems
• 42″ tall corrosion resistant aluminum post
• 3/32 galvanized cable coated to 3/16″ outer cover diameter with yellow PVC coating
• Cable has a breaking strength of 920lbs
• Shoulder eye bolt positioned at top of post and cable wraps around the bolt to secure connection
• Flags are powder coated yellow with tabs bent at 90 degree to reduce “creep”
• Flags are positioned 6ft from post or other flags
Check out our installation and specifications Downloads below:
1. Click here: Warning line basic installation guide 30lbs
Easy to install • No Maintenance • Non-Penetrating • Fall Prevention • Budget Friendly
* All fields are required